ACSA National Construction Safety Officer (NCSO) Practice Exam

These questions are part of the practice quiz. Start practicing

• What is necessary for management to effectively demonstrate commitment to safety policies?
• Which type of insurance provides coverage against accidents or damages caused by company vehicles?
• What is one guideline for word choice when delivering a message?
• What is the primary purpose of an action plan within an HSMS?
• What should an investigator focus on when interviewing workers involved in an incident?
• What is one legal reason for an employer to have a Health and Safety Management System (HSMS) in place?
• What is a basic element of a WHMIS program related to the identification of hazards?
• What step follows the completion of an inspection?
• Which of the following is a consideration when evaluating a contractor's experience?
• What are the three components of an inspection program?
• The Injury Severity Rate (ISR) primarily measures what aspect of workplace safety?
• Which of the following is part of the initial questions an investigator should ask regarding an incident?
• What aspect should be focused on during an inspection to ensure compliance?
• Which of the following is a method to verify that a message was received as intended?
• Which type of control measures involves the use of gloves, hard hats, and safety glasses?
• How long must employers keep records of acute illnesses or injuries at the worksite?
• What is the first stage in planning a toolbox talk?
• Which indicator would best represent historical performance in safety metrics?
• Which of the following is NOT one of the five sections to consider when organizing a training session?
• Which of the following represents the three factors of Due Diligence?
• What should inspections determine regarding supervisors and workers?
• In the context of worksite parties, who is defined as a "worker"?
• What are direct causes in the context of incident investigation?
• How can management demonstrate commitment to the HSMS?
• Which of the following describes the 'Specific' component of S.M.A.R.T. corrective actions?
• What does the auditor focus on during the site familiarization step?
• Which of the following is a requirement for effective investigation reports in occupational health and safety?
• Why is feedback important in communication?
• Which internal source can be consulted for help regarding safety and compliance issues?
• What is the main reason why companies should investigate incidents?
• Which of the following defines nonverbal communication?
• What should an investigator do to ensure accuracy during witness interviews?
• Why should management participate in formal inspections?
• Which of the following is NOT a common type of COR audit?
• Which step is involved in the formal inspection process after planning the inspection?
• Which of the following is considered a direct cause of an incident?
• Who should typically be included on an inspection team?
• Which of the following is an important aspect of effective communication in a message?
• What are the three criteria for a suggestion for improvement (SFI)?
• Which aspect of an audit is primarily concerned with ensuring that risks are properly identified and mitigated?
• What does Expectancy Theory relate to?
• What is the main purpose of an Action Plan in the context of health and safety management?
• What step comes after 'Processing the message' in effective communication?
• For employers with 10 employees or less, how is an HSMS evaluated?
• Who is defined as an individual certified to conduct health and safety audits?
• What is the first action an investigator should take once arriving on the scene?
• What type of conflict involves disagreements between two teams?
• What does the factor of "Foreseeability" in Due Diligence refer to?
• What is the primary purpose of auditing in health and safety management?
• What is the role of Certified Partners (CPs) in the COR certification process?
• What is the goal of identifying potential direct causes of hazards during inspections?
• What type of incidents should be detailed in an investigation policy and procedure?
• What is included in the documentation review step of the audit process?
• What does the Lost Time Frequency Rate (LTFR) measure in a construction setting?
• What are the six steps in the order of an effective communication process?
• Which negative effect might result from unresolved conflict in a workplace?
• Which of the following factors is not included when determining contractor experience?
• Which of the following is essential for evaluating a contractor’s capability?
• Which aspect is NOT included in the Five-Step Site-Specific Hazard Assessment Model?
• When assessing a contractor's past performance, which type of information is not typically used?
• What are the four key principles of instruction for On-the-job training (OJT)?
• What is a negative effect of unresolved conflict regarding workplace dynamics?
• Which is the first step in the Five-Step Site-Specific Hazard Assessment Model?
• Which of the following is NOT a criterion for validation notes?
• Why is monitoring and evaluating contractors important?
• Which training method best describes ongoing support for workers after initial orientation?
• What defines an intrinsic reward?
• What type of conflict is described as occurring between two individuals?
• What type of system is considered a complete structure maintaining high standards across all parts of an organization?
• What term describes the costs associated with loss-type incidents?
• Which technique is important for active listening during audit interviews?
• Which question is essential for an investigator to answer initially during an incident investigation?
• Which of the following is classified as a type of training in an effective training program?
• How do observations contribute to the verification process in an audit?
• What type of inspection would be part of both informal and formal aspects of a WHMIS program?
• Which of the following is NOT one of the purposes of conducting safety inspections?
• Which of the following is an example of a lagging indicator?
• How long is the COR audit cycle?
• What type of duty relates to the legal obligations professionals must follow?
• How is perception defined?
• What is one of the primary purposes of conducting a safety inspection?
• During an audit, what is the auditor expected to maintain throughout the process?
• What are the three basic types of information that prime contractors consider to determine a contractor's ability to meet the scope of work?
• What is a crucial method for evaluating how well a Health and Safety Management System (HSMS) is performing?
• In risk assessment, what do the terms "Severity" and "Probability" represent?
• Which of the following are common perception errors?
• What is one way to consider safety when hiring contractors?
• What is one difference between losses and incidents?
• Which of the following is NOT a step in the simplified investigation process (SIP)?
• What is a formal inspection type that is irregular and unscheduled?
• Which statement best defines empathy?
• Why is it important for an investigator to understand both substandard practices and personal factors?
• Which of the following best describes direct costs in safety management?
• Which of the following is NOT a key issue that inspections should focus on in the HSMS?
• What type of duty relates to obligations that arise from one's personal values and ethics?
• Which of the following is NOT an example of indirect costs?
• Which of the following is an example of an opportunity for management to show commitment to safety?
• Which ethical principle focuses on the greatest good for the greatest number?
• Which type of evidence is considered the most time-sensitive?
• Which aspect of the SMART criteria stands for "Specific"?
• What principle focuses on the greatest benefit to the greatest number of people?
• What is an extrinsic reward?
• What is typically discussed in the wrap-up meeting of the audit process?
• What is a key benefit of conducting audits within a Health and Safety Management System (HAMS)?
• Which model consists of nine steps to assess hazards?
• What is one of the ten elements of the ACSA audit tool?
• What does "paraphrasing" involve in active listening?
• Which factor is related to the appearance of the speaker in communication?
• Which type of insurance protects against claims of negligence in professional services?
• What is the first step in contractor management?
• Which of the following best describes what is meant by "basic causes" in incident investigation?
• Which of the following is an example of an engineering control?
• Which validation technique involves reviewing existing documentation during an audit?
• Which type of evaluation is NOT commonly used in training programs?
• What is a critical reason to establish a Health and Safety Management System (HSMS) according to moral grounds?
• Which of the following employee levels is included in the audit interview process?
• Which statement best describes the outcome of the post-audit meeting?
• How can effective communication enhance a Health and Safety Management System (HSMS)?
• What document may be required as part of the WCB pre-qualification process?
• What should be defined clearly by the prime contractor to a contractor?
• How often should a company test each ERP using a drill?
• Which aspect is specifically mentioned as an important part of auditor ethics?
• What does emotional intelligence primarily involve?
• At what level is the Basic Cause of an incident identified?
• What distinguishes field notes from validation notes during an audit?
• Which of the following is a type of pre-qualification requirement?
• Which formula gives the Total Recordable Incident Frequency (TRIF)?
• What does a clearance letter typically verify in contractor qualifications?
• Who has the primary charge of a worksite according to safety definitions?
• How many elements is the ACSA COR audit tool organized around?
• When implementing a safety measure, which of the following would be considered a Leading Indicator?
• Which of the following is NOT a component of the SMART criteria for corrective actions?
• What is a key factor that contributes to due diligence?
• What are two factors that influence the frequency of inspections?
• What does the term "hazard" refer to in a safety context?
• How many elements is the SECOR program organized around?
• Who bears potential liability for mishandling or misuse of a hazardous substance?
• What is a best practice for conducting interviews during an investigation?
• What should be documented as a corrective action to track completion effectively?
• How is the Lost Time Frequency Rate (LTFR) calculated?
• What is the first step in the audit process?
• What is a common type of administrative control used in workplace safety?
• What is Bias?
• What is one goal of monitoring corrective actions during safety inspections?
• Which of the following is one of the key roles and responsibilities for auditors?
• Which component of S.M.A.R.T. corrective actions ensures actions are possible to achieve in due time?
• What element of the WHMIS program focuses on ensuring compliance with safety standards and best practices?
• What type of costs do not typically relate to direct costs in safety management?
• What is the key factor of Expectancy Theory?
• Which question is NOT used to guide contractor management?
• Which test is NOT one of the six tests for making a difficult decision?
• What does the Partnership in Injury Reduction (PIR) primarily aim to achieve?
• Which of the following is not a factor that influences a contractor's current capability to do work?
• Which of the following best describes "Control" in the context of Due Diligence?
• What is the fundamental distinction between values and priorities?
• Which of the following is an example of a legal duty?
• Which type of conflict occurs within an individual?
• Which of the following is NOT a step in the Simplified Investigation Process (SIP)?
• What does the term "self-employed person" refer to in safety management?
• What is required to start each three-year audit cycle in COR certification?
• What are the three questions to consider when developing a message?
• Which of the following is an example of a leading indicator in construction safety?
• Which step comes first in prioritizing inspection findings?
• Individuals communicate using which of the following five items?
• What ethical principle emphasizes doing what is right for each individual?
• Which of the following best describes the hierarchy of control?
• What is NOT one of the factors involved in active listening?
• What three factors affect perception?
• What is one of the four key principles of instruction?
• Which of the following is NOT a type of communication channel?
• What are the five things individuals use to communicate?
• In which area should inspections primarily focus?
• Which term best describes an evaluation of an organization's health and safety management system against an approved standard?
• What is the main goal of the Five-Step Site-Specific Hazard Assessment Model?
• What is the last step in the Nine-Step Formal Hazard Assessment Model?
• Which aspect affects how messages are perceived by an audience?
• A health and safety policy is primarily described as what?
• Which of the following is NOT considered an external source of help in safety practices?
• What is a primary goal of effective communication?
• When conducting an audit, which method allows for a focus on a specific area?
• What should be included in the agenda for a pre-audit meeting?
• Which of the following is NOT a key requirement of a health and safety policy?
• What do audiences need to fully process a message?
• Which of the following is a step in hazard assessment?
• What aspect of loss management addresses financial impact of loss-type incidents?
• What is the minimum overall score required for COR certification audits?
• What is NOT a section generally included in a scope of work?
• What is an effective approach when establishing the relevance of corrective actions in a safety management plan?
• How many validation techniques are there when performing an audit according to the provided standards?
• What format should corrective actions follow, regardless of the level of risk?
• In an inspection, what should be monitored regarding hazard controls?
• Which type of formal inspection is conducted at regular intervals?
• What is the formula for calculating the Injury Severity Rate (IRS)?
• What is a characteristic of informal inspections?
• What is the purpose of preparing materials in the planning stage of a toolbox talk?
• What is the first step in the site-specific hazard assessment process?
• Who must be designated in writing as the person in control of a worksite if there are multiple employers?
• What is one question to consider when evaluating your own motives?
• What is the first step in the ACSA quality assurance process?
• In the SIP, what is one of the two components of "Secure the Scene"?
• Which four items are exchanged in communication?
• Who is primarily responsible for developing a collaborative environmental management program on a project?
• What are leading indicators typically characterized as?